Modix Clog Detector 90 degree adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple to print, 90 degree adapter for the Modix clog detectors.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple to print 90 degree adapter for the Modix Clog Detector for use on a 4040 profile.
Designed to be printed without supports
Recommended to print this in PETG or ABS, with a 0.2mm layer height or more. More than 0.5mm layer height might be tricky through.
Advisable to print with a 0.6 or 0.8mm nozzle, 1mm nozzle or higher is tricky
Required hardware:
2x M5x16mm screws (can also be M5x15mm low profile screws or the like)
2x M5 4040 T-nuts
2x M3x10mm screws, you can re-use the M3x10mm screws from the assembly
2x M3 nuts (can also be M3 square nuts)
The design has been updated a bit to include a passthrough hole for the cable