Gaggia Classic Pro Coffee Knockbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coffee knockbox modeled on the general form and dimensions of the Gaggia classic pro
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 264
- Wydruki
- 1
- Wyświetlenia
- 2241
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple knockbox that fits well with the Gaggia Classic pro, because it uses the same angles and scaled dimensions. The rod dimensions are 20x20x140. I used oak in my case, but of course you can also just print the rod-stl.
Because my oak was a little under-sized, I created the spacers, which I printed out of flexible material. Just try without and see if you need them or not.
I used PLA, which seems to be fine handling the heat of a fresh puck.The cleanboxis is an optional print.
The filament I used is Fillamentum Vertigo Starlight which is not a perfect match for the blue Gaggia but pairs quite nicely.