1 / 12
The Mandalorian Season 3 trailer Bent Stalk helmet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So a quick throw together of the helmet seen in the season 3 trailer for The Mandalorian You'll need to heat up and…
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 569
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (49)Powiązane
So a quick throw together of the helmet seen in the season 3 trailer for The Mandalorian
You'll need to heat up and bend the stalk to give the same look.
Also liberties taken with the back as we didnt get to see it.
205mm inside ear to ear measurement
Scaling is a must
Untested.
EDIT i've added a bent stalk
Category: 3D Printing