br34ker's Anet A8 Titan V6 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my mount for the E3D Titan extruder combined with an E3D V6 for the Anet A8 Printer. It fits on the original…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is my mount for the E3D Titan extruder combined with an E3D V6 for the Anet A8 Printer. It fits on the original linear guides. It's cooled by the original 40mm fan and has a 5015 fan for the parts.
I also created a tool mount to interchange with the parts-fan (e.g. for bed leveling with a dial indicator).
It's also updated for mounting a BLTouch-sensor - Beware that it only fits with the E3D V6 nozzle. For the Volcano you need a distancer.
Use following settings for marlin:
define X_PROBE_OFFSET_FROM_EXTRUDER -31 // X offset: -left +right [of the nozzle]
define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
I will provide a step-model to the tool mount, so you can easily design your own modules.
Print Settings
Printer:
Creality3D CR-10
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.3
Infill:
20-30%
Notes:
Only the main mount need supports. The rest can be printed without.
Category: 3D Printer Parts