1 / 2
Barn Door Floor Guide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a guide for the barn door I made, but the commercial ones I found all extended too far into the hallway.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
I needed a guide for the barn door I made, but the commercial ones I found all extended too far into the hallway.
I decided I could design my own. It's printed with 15% infill from MatterHackers Build Series black PLA. I wasn't sure if the PLA would be strong enough, but I have had no problems!
The slight angle on the mounting side was to accommodate the existing door trim.