1 / 1
Bosch Rexroth 80 x 40 10mm profile - Calibration Saver
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bosch Rexroth 80 x 40 10mm profile with 6.5mm hole I use with relevant 6mm tnut and knob
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Bosch Rexroth 80 x 40 10mm profile with 6.5mm hole I use with relevant 6mm tnut and knob to be able to abut something else I have set into the extrusion and calibrated, thus if I want to remove the other item from the extrusion I can put it back to where it was calibrated to prior.