Filament Clip - Rounded Edge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another filament clip.
- Ocena
- 4,889 / 5
- Polubienia
- 88
- Pobrania
- 1228
- Wydruki
- 34
- Wyświetlenia
- 2819
- Oceny
- 36
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Yet another filament clip. Rather than twist or contort the loose end of your filament to hold in-place by hole locations on the reel, this clip provides a simple way to clip and un-clip the loose filament during storage.
The clip fits onto the edge of the spool reel. The clip has been optimised for a spool reel with a 4.0mm rounded edge and tapers away from the edge, as implemented on the 3DFillies filament brand. Other filament brands may fit well, too (there are so many brands!).
In most cases, you can leave the clip in position on the reel whilst printing. It's tiny, at only 10mm high. The filament facing side is angled to avoid the spooling filament and not get snagged. The filament lightly snaps into place, but holds well in storage.
I hope you can find this print useful, too.
Print instructions
I've printed the clip in both PLA and PETG, but found PLA showed cracking, so I'd recommend PETG. My print is made in PETG 1.75mm Aurarum white filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer.