MINI-z-bottom R8 with Fysetc/uxcell T-Nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MINI-z-bottom part with a larger gap in order to support the larger Fysetc/uxcell nuts.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 284
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Fysetc 3030 series slide-in t-nuts with M3 threads (also commonly available on Amazon under uxcell brand) are slightly larger than the spec nuts for the Mini+.
I remixed the MINI-z-bottom part to have a larger gap between the extrusion alignment protrusion as shown in the attached pictures in order to support the larger Fysetc/uxcell nuts.
I used this modified part successfully while building a highly customized Mini+ and it worked without any problems.
The source files are attached, please modify yourself if your tolerances/t-nuts require it.
Cheers!