iFixit Mako Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic replacement lid for the iFixit Mako driver kit
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1024
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement lid for the iFixit Mako driver kit. It's my favorite kit and I lost mine awhile ago. Includes screw organizers at the bottom and a magnetic close like the original had. It was designed to use 5x2mm neodymium disc magnets. This is about as big as you can go and still fit alongside the bottom lip of tool holder. Each hole has three magnets.
These are the specific magnets I used.
https://www.amazon.com/gp/product/B0BW98Q8JB/
As for tolerances, I went for a press fit on the magnets and it has held up except for one corner. So I used super glue on that one.