1 / 9
Hook Belt Buckle - Waistband Buckle - VR Strap Buckle - 46mm Hole - 50mm Strap - Variations - Tension Buckle — zdjęcie 1
1 / 9

Hook Belt Buckle - Waistband Buckle - VR Strap Buckle - 46mm Hole - 50mm Strap - Variations - Tension Buckle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hook on type Buckle / VR Strap buckle - 46 or 50mm Fabric. Tension Buckle. Different variations. Updated over time.

Ocena
0 / 5
Polubienia
40
Pobrania
263
Wydruki
0
Wyświetlenia
1724
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

So I wanted to try designing a hook on type buckle that can be used with some straps for easy release.

Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine.
Quick release waist band? If you find a use then post pictures in makes!

This is a BIG BUCKLE and has a 46mm/1.8inch fabric hole.
The smallest hole to fit through is 3.234mm/0.13inch at its smallest point so quite tight and then gets wider as it reaches the teeth.
The biggest hole is 8mm/0.31inch and gets a bit smaller as it reaches the teeth.

Images show 50mm/1.97inch Fabric/Band.


If you have an idea of some strap attachments then leave a comment or give me a message!
@kyleirelandtech on Instagram or Twitter.

The mousepad is a SOKU DROP X1.

Printing

I printed on a Creality Ender 3 Neo at 0.2mm Layer height, 25% Triangular Infill with Tree supports at 20% and they came off quite easily.
Print in which direction you find would be structurally best.

When printing you should think about which material would be the best based on how much weight this thing will be holding.
I printed in PLA but you might want to try ABS or PETG which I haven't tried. let me know how it goes!

Files
The images show "Hook-spiky.stl" and “Pin-spiky.stl”
The others are untested such as reversed teeth which could be handy if you wanted them on the bottom side.
See “Untested-Hook-spiky-reverse” and “Untested-Pin-spiky-reverse.stl”

Some people might want reversed spikes so I made those files, along with a single loop if you wanted to sew on fabric.

I've provided a variety of files if you feel like modifying such as;
.f3d (Fusion360) or .step
Print the individual files, not the all together .stl

 

If you use these then please post a make/image with your results!
Attribute/Remix if you modify!

---

EDIT; I have added some other pieces that you might find handy,.
Anything with “untested” means I haven't tried it.

(I was a bit sleepy making this so any files with the word “cable” actually means fabric/elastic!)

New smaller buckle variant, half the size but may not be as durable!

Tagi