Sisyphus Auto-Rewind Spool Holder (Single material)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament load/unload issues? MMU2 taking too much space? Not with this Sisyphus Auto-Rewind spool holder!
- Ocena
- 4,857 / 5
- Polubienia
- 49
- Pobrania
- 538
- Wydruki
- 5
- Wyświetlenia
- 4874
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament load/unload issues? MMU2 taking too much space? Not with this Sisyphus Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to almost three revolutions.
Use two curved nuts to attach the spool to the roller. Put roller on stand. Insert filament in extruder/MMU2. That's all!
A filament tube can be installed from extruder/MMU2 to the frame in two ways: above (using tube holder) or below the spool.
The slope of the track can be adjusted by placing objects under the frame and/or by screwing two M3 bolts in the designated holes in the frames. This has a direct influence on the rewinding torque.
Video: https://youtu.be/8nZiOu8y_jY
This is the single-material version. The multi-material version is on https://www.prusaprinters.org/prints/4357-sisyphus-auto-rewind-spool-holder-mm
STL and STEP files are on Thingiverse: https://www.thingiverse.com/thing:3739793
Print instructions
PLA