1 / 3
Filaments.ca Spool Adaptor Bambu Lab X1C AMS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adaptor is used to make Filaments.ca cardboard filament spools work in the Bambu X1C AMS
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 313
- Wydruki
- 1
- Wyświetlenia
- 1269
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 8)Remiksy (1)Kolekcje (73)Powiązane
This is an adaptor that clips around the cardboard spool from filaments.ca to work in the BambuLab X1C AMS system.
When looking around online I did find some similar models however I didn't find one that actually fit onto the spools without falling off.
I added some small tabs around the edges to keep it in place. It should work for cardboard spools with an outer diameter of approximately 198.5mm.
No hardware required, print 2 per spool. They fit on the X1C/P1P build plate.
