Dice and miniature vault
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dice box, dice tray, miniature vault and storage solution in one!
- Ocena
- 5 / 5
- Polubienia
- 146
- Pobrania
- 289
- Wydruki
- 1
- Wyświetlenia
- 2329
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A dice box, dice tray, miniature vault and storage solution in one!
To complete this you will need to get some round 5x2mm magnets, and some felt and superglue from the craft store. If you plan to make the miniature vault you will also need a few small rubber bands.
Instructions
Print either the plain of mmu lid, and cut some felt to size. Glue it to the inside of the lid to create the dice tray. I used a few small drops of superglue, don't use too much or the felt will go hard where your glue it. The lid will not fit well without felt!
FYI For me the lid hold in place just fine even without the magnets.
The miniature vault
It should be self explanatory from the photos. Just glue a magnet into the vault and into the mini holder. Slide the two halves together and add a rubber band. Make sure you get the polarity of the magnets correct!
multicolor print without MMU
If you don't own a MMU unit for multi color printing, it's still possible! Only the first 2 or 3 layers of the lid require color changing. You can follow a howto on manual color changes