Tilted wall mount for Gridfinity base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Gridfinity baseplates. Slightly tilted for easier access.
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 473
- Wydruki
- 11
- Wyświetlenia
- 2519
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple wall mounts for mounting with countersunk M4 screws. Base plate is connected to wall mount using M3x12 mm (may be longer) into M3x4x3 inserts. Two variants are provided: Wall mounts with only one insert for the left and right end, plus one with two inserts for the middle. As the title says: Slightly tilted toward the user - I recommend using magnets ;-)
Prints easily without supports.
Corresponding baseplate is here: https://www.printables.com/model/436094
If you want to modify the angle or the number of Gridfinity units: FreeCad sources are included.