1 / 3
Bowden connector holder for Ikea 365+ drybox — zdjęcie 1
1 / 3

Bowden connector holder for Ikea 365+ drybox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I couldn't screw my bowden tube connector into the box wall because wall was too thin. So here's my solution.

Ocena
0 / 5
Polubienia
17
Pobrania
105
Wydruki
0
Wyświetlenia
1331
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I couldn't screw my bowden tube connector into the box wall because wall was too thin. So here's my solution.

Because superglue does not glue to the plastic Ikea 365+ plastic, I made this a two part. You drill a 14mm hole, put one at the back, other at the front, and glue them together. They fit snugly and although you can rotate them in the hole, no significant amount of moisture should be able to enter the box.

Bevel at the bottom is probably unneeded, it's there to stuff gel cyanoacrylate glue to make it tighter. Worked for me.  Hope it'll work for you.