Sturdy wall shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy wall shelf designed to fit the Prusa i3 print bed.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 258
- Wydruki
- 1
- Wyświetlenia
- 1252
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this wall shelf to hold the charger for a cordless drill/driver. For strength, mount the center bottom hole through a wall stud, then you can use any kind of wall anchor for the 2 side holes. The mounting holes are sized for #8 wood screws.
There are 2 variations: one has a full rectangular shelf (not pictured), the other has a notch in the front to reduce filament and print time. Use the notched version when you need to support a rectangular item with feet, like the charger in the picture.
There are two ways to orient it on the print bed, each with advantages. If you print it shelf-down, you will get more strength but a chance of warping. If you print it back-down, warping will be reduced but the shelf will be somewhat less strong.
I prefer PETG for functional prints but you can print with PLA if needed. I used Atomic Filament PETG with a 0.6mm nozzle.
Built in Onshape, here is a link to the model.