Pickup Selecter Switch Knob for the Prusacaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom knob for the pickup selector switch on the Prusacaster
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 173
- Wydruki
- 4
- Wyświetlenia
- 901
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Just to further customize and add to the amount of 3D printer hardware on the Prusacaster (https://www.printables.com/model/398795-the-prusacaster-a-3d-printable-guitar), I made this knob for the pickup selector switch. The fitment is TIGHT but this is intentional. I made a few other iterations and they just don't hold on very well. Once I landed on this size, I was very happy with how well it stays in place. Printed with the hole down and used a brim to keep it in place on the build plate. This is printed with Prusament Galaxy Black PLA for the body and the tip is Prusament Orange PLA. Don't try to hammer it on or be to aggressive trying to get it in place. Apply slow even pressure until it is seated. Enjoy!
MK3S
Prusament Galaxy Black PLA
Prusament Prusa Orange PLA
0.4 Nozzle @ 0.2 layer height
No supports
Hole side down
Use a brim
Edit: STEP file added - dimensions for different kits may vary - this was created for the Thomann Music T-Style Kit.