Adjustable Juice Box Holder (print-in-place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable juice box that fits different juice box sizes. Print-in-place, support not required.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Adjustable juice box that fits different juice box sizes. The side is curved so that when your kid presses it, the force is borne by the side of the juice box instead of in the middle, reducing the spillage.
Print-in-place, support not required.
Once printed, use force to press the two parts together to break loose the sliding joint. Then the whole adjustable side can move freely.
Update: I have uploaded a “Snug Version” which has the connection beams modeled to pinch towards the center creating a much tighter fit. If the original version is too loose for you, please try the Snug Version