Enclosure door blocker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple blocker to keep the Prusa Original Enclosure doors open enough to be able to print PLA
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 4
- Wyświetlenia
- 377
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a very basic tool to keep the doors of your Original Prusa Enclosure open just enough to be able to print PLA without overheating. And cats cannot tampered with the print!
Depending on your configuration, letting the doors fully opened is not an option, this is the fundamental reason why I draw this model.
It's sturdy enough so you do not get any vibrations while printing. Doors are tightly fixed again the piece.
I might change the original handle and add a hinge with this in the future to keep it attached.
In the picture: printed in transparent PLA, 4 perimeters.