Rolodex for Sample Pouch Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Altered original design to accommodate sample pouches from L'BRI Pure n' Natural and added logo on knobs.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
New design accommodates 20 samples of 85mm wide by about 120mm tall. Should fit all samples from L'BRI.
For a full set, print (2) ratchets, (2) pivots, (20) slots, (2) stands, (1) knob, and (1) knob-with-axle. On my 220mm x 220mm print bed, I was able to fit everything but the stands. I could only print one stand at a time in just the right orientation for it to fit on the print bed.
Assembly notes:
1) make sure the ratchets and teeth on the stands are pointing the same way
2) getting all the slots into the dimples on the pivots can be an exercise in patience, but inserting them criss-cross from each other and trying to keep it as symmetric as possible really helps. Applying a bit of pressure to hold the ones you have in there also helps.
3) see original rolodex design for more tips!
Changes summary: Increased height and width of the original design to accommodate sample pouches from L'BRI Pure n' Natural. Changed shape and slot thickness to hold heavier, thinner samples. Added logo for L'BRI Pure n' Natural to knobs. Made ratchet less flimsy (though the original issue might have been due to my printer settings). Added small clearance for parts to slide onto the axle easier.