1 / 2
Fiber Laser Lens Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fiber laser lenses need a safe home and this fits the lens perfectly, even with caps on both ends.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 486
- Wydruki
- 2
- Wyświetlenia
- 1796
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (81)Powiązane
I printed this on my Ender 3s1 plus and used .28 layer thickness and 5% girod infill. The holders sit in a drawer so I did not need anything stronger. The lens holder printed perfectly.
If you want it stronger/thicker, use different settings.