1 / 2
Lord of the Rings Lamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This lamp inspired by LOTR will not go unnoticed. IMPORTANT : You should print the ring in WHITE or TRANSPARENT PLA.
- Ocena
- 4,8 / 5
- Polubienia
- 1134
- Pobrania
- 3491
- Wydruki
- 21
- Wyświetlenia
- 23 972
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 21) (Komentarze: 47)Remiksy (2)Kolekcje (1249)Powiązane
Explanation step by step [ENG SUB]:
Print settings :
Layer 0.1mm or 0.2mm - 6 layers top and bottom - 4 layers perimeter - infill 0% (for the ring) infill 50% (for the bases)
IMPORTANT : You should print the ring in WHITE or TRANSPARENT PLA.
Buy all components: https://jeje-linge.fr/en/products/lord-of-the-rings-lamp
Librarie : Adafruit_NeoPixel
