PBC Dream Blaster - Candy Launcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This came about because of a dream, not my dream but a wonderful dream.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 813
- Wydruki
- 4
- Wyświetlenia
- 3978
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This came about because of a dream, not my dream but a wonderful dream. Kelly Cline @kcline had the idea of having a device that would be able to launch some peanut butter cups so that someone would be able to catch them from 10ft away. Well that dream can now be a reality.
But do not limit yourself to peanut butter cups, anything that will fit in the tray can be flung majestically through the air.
Photo Provided by Joel Telling (3D Printing Nerd)
@joeltelling
Support me on Patreon:
Print instructions
All parts should be in their best orientation to print and it should be able to print completely without any supports.
To assemble the launcher take the grip and place the trigger in, then take the main slide and that goes on top of the grip. Take the sight and that will slide in from the top through the main slide and into the grip. After that you can gloop up the grip sides. For the rubber band you will take the slider, and put it on top of the slide making sure the little bottom goes through the slide, then thread a rubber band through it and hook it on the 2 posts on the bottom of the slide.
Assembly Video: