Custom Firmware for SUNLU T3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom Firmware for SUNLU T3 Warning: don't use this firmware if you use usb connection. Will make an update for this
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 613
- Wydruki
- 0
- Wyświetlenia
- 2719
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
***Custom Firmware for SUNLU T3 based on Marlin 2.1.2 bugfix January 2023***
*** Added the Source Code from SUNLU to “other Files”***
No USB functionality!
Since I don't use USB I didn't test this, but was told it doesn't work. Will check the pins and make an update asap.
Installation instruction:
- Turn printer off
- Place firmware.bin file on your Card
- start printer
- wait
- ...
- profit
Following Things work with the Sunlu T3:
- Automatic Bed Leveling
* now with 5x5 points
* not on any G28, use G29 for ABL (could implement in start G-Code if you want to)
* will restore after G28
- BL Touch assistet bed tramming
- Double click to babystep
- Higher Hotend Temperature
* since I have an all metal hotend installed i raised the temperature to 285 °C - be careful with the standard hotend!!
- PID Tuning for BED and Hotend
*use the custom Menu for Tuning
- I calibrated my Printer (x, y an E Steps/mm)
*if this doesn't fit your Printer you can reset the steps/mm in the advanced configuration menu to:
X - 80 steps/mm
Y - 80 steps/mm
Z - 800 steps/mm
E - 135,1 steps/mm
*save to EEPROM!
- Runout Sensor is working - even with Jam Detection. Standart procedure at runout error is the M600 filament change workflow.
Whats not working:
- fastmode is not implemented (yet) but can be achieved through manually rising the acceleration and jerk settings (raise speed via feeding speed or via slicer settings)
*i don't know if I'm able to implement fast printing, because I don't use it and I'm lacking time for this.
If you share the Firmware, please share the whole zip file.