1 / 8
Ultimate Y-Belt Tensioner for Prusa MK3S, S+ & S++
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows belt adjustments to be done quickly without turning over the printer. Also allows quick belt changes
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
I liked the concept used by G.Design but wasn't comfortable with the adjusting fastener being at an odd angle to the belt load and that the head and nut would not be fully engaged in the load transfer from the belt tension. By moving the idler forward, I was able to put the tension adjusting fastener at the center of the mount and in-line with the belt tension. By using a rivet nut, I was able to get 7mm of adjustment.