Siemens vacuum cleaner replacement wheel (rim + tire)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Siemens vacuum cleaner replacement wheel (rim + tire)
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 81
- Wydruki
- 3
- Wyświetlenia
- 529
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
We have a Siemens VS06G2410/03. And lately 2 of the 3 wheels broke.
Unfortunatly I have no ABS here (just PETG + PLA) and i wanted something like rubber wheels (because of our laminate). Therefore i took the freecat model from andy and remixed the model to a rim + tire set in fusion.
I printed mine in PLA+ as a rim and TPU for the tire. Since i had no 30mm M2 screw, i used a 30mm nail, which also fit perfectly. No supports.
Hint: For the full fire i suggest a brim. Then it works fine. If you have trouble with your bed adhesion, use 2 x the tire_half.stl