Neato Botvac dustbin clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After a few years of use the dustbin was not latching to the vacuum cleaner and this rendered the vacuum cleaner…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 173
- Wydruki
- 3
- Wyświetlenia
- 960
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
After a few years of use the dustbin was not latching to the vacuum cleaner and this rendered the vacuum cleaner useless( sensor detects whether the dustbin is properly closed). At first glance the part could be glued, but this was only a temporary solution.
There was only one option left and that was to recreate the part.
After several attempts and tweaks to the part I got it working... finally!
The part was printed in PLA. Next time I'll print in black PETG to have a more robust part.
Print instructions
infill: 40%
support: everywhere