1 / 5
Heating pipe rosette
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A heating pipes rosette. The one that you can buy are so bulky they did not fit in there. Now we have a slim one. YEAH
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Hey!
We have a heating pipe that is not far enough from the wall so that the standard stuff that you can buy did not fit in there.
I only found the single pipe rosettes but most of the time dirt will stuck between them and i hate it.
So i made this one that fits on both pipes at the same time. No dirt gap between.
print it 2 times - take the Pins and put them together. They hold tight.
I used PLA.
Feel free to costumize and adjust it when your pipes are not fitting in there.