1 / 8
Lever Y-Belt Tensioner for Prusa MK3S+
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of design by Matty Vee. I moved the pivot point aft so that the adjusting screw is parallel to belt
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 722
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
This modification moves the pivot point of the idler pulley aft so the adjusting fastener is parallel to the Y-belt at the mid-point of the adjustment range. I also added barrel spacers to allow better load transfer at the adjustment screw head and nut.