Hero Me Gen7 Ender-3 Gantry Belt Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts for the belt of the custom gantry.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Not sure why, but I couldn't find any belt mounts anywhere in the HMG7 ecosystem that worked for the Ender-3 Gantry plate found in gantry mounts. I could have just overlooked it, but nonetheless, I designed some myself that are easy to install and attach to the pre made holes in the gantry plate. The main reason I switched to this plate was for the loss of weight as well as the open back of the plate for the hotend fan, diverting the air away from the parts (useful for printing ASA). Anyways, here's a quick and easy fix that needs no supports and takes maybe 5 mins to print (depending on printer speed).