1 / 4
Wowstick Holder with Bit-Storage for IKEA Skadis — zdjęcie 1
1 / 4

Wowstick Holder with Bit-Storage for IKEA Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple holder for the Wowstick for the IKEA Skadis pegboards, capable of holding 24 Bits

Ocena
5 / 5
Polubienia
13
Pobrania
73
Wydruki
1
Wyświetlenia
410
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This holder for the IKEA Skadis pegboards is made around the original Wowstick stand. Separately, you can print a Bit-holder for 24 of your most used Bits; both items will also work individually.

Print the Hooks lying down for ideal print-line placing, then push them into the Holder. The Bit-Holder may sit a bit tight on the original Wowstick stand, yet it will sit relatively loose inside the Skadis-Holder. That way, it's easily rotatable for fast access to your Bits; its weight will hold it down properly.

For the Hooks I used five walls for a bit more sturdiness, everything else is just my default three walls and 15% infill. 0.24mm layer height is fine. I printed everything in material4print PLA