1 / 3
Toilet Paper Holder with Holes for Screws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed a holder that I really like to be able to wall-mount with drywall screws.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 516
- Wydruki
- 9
- Wyświetlenia
- 1431
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 9) (Komentarze: 13)Remiksy (0)Kolekcje (70)Powiązane
Great model, but I don't trust tape to hold mine up. Made screw holes so that two #6 or #8 drywall screws can be inserted flush with the design to mount this on a wall.
Printed in PLA at 0.2mm on Prusa Mini, bump up to 4 perimeters if you want to ensure it is sturdy enough. Print on its left side (with the stick that holds the TP pointed up in the air) and only paint on supports under each of the brackets that angle out to support the phone stand.