1 / 4
The Umbrum, Balisong Trainer — zdjęcie 1
1 / 4

The Umbrum, Balisong Trainer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My personal balisong trainer

Ocena
4 / 5
Polubienia
7
Pobrania
59
Wydruki
1
Wyświetlenia
975
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

THE UMBRUM:

This is The Umbrum, i designed this to be one of the best free downloadable balisongs out there. I'm hoping everyone out there enjoys it.

This is by no means the final version, as people start printing these and give feed back i will be improving the design to flip even better

 

Note:

I'm a very new flipper and do not have the best experience

PLEASE DO NOT SELL

do not resize the parts, they have very specific tolerances resizing it will ruin these

 

Print Instructions: 

Print p1 and p2 with .15mm layer height and 15% infill

print p3 with .1mm layer height and 90% infill

these settings are for the right balancing you can try other settings, but I recommend these.

 

Assembly Instructions: 

You need a total of 6x M4 nuts and 4x M4-.70 x 10 socket cap screws 

  1. glue two M4 nuts into the blade (p3) and let dry before fully assembling
  2. press on p1 onto the blade and put in 2 m4 bolts into the handle
  3. press in two m4 nuts into p2 
  4. screw in p2 into p1
  5. repeat steps 2-4 for the second handle
  6. tune to liking, and enjoy your Umbrum

(I will hopefully make an assembly video, as well as a tuning video

Tagi