Inkwell-Style Razor Stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice looking stands for your safety razors
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to design some inkwell style razor stands for some of my vintage razors. There's four models here that were designed for vintage gillettes, but with 3 sizes between 14.5mm, 12mm, and 10mm, they should fit most safety razor handles out there. Just measure yours and pick the right one.
Merkur HD and Fatboy - Fits up to a 14.5mm handle
Slim and Superspeed - Fits up to a 12mm handle
Ball end Tech - Fits up to a 10mm handle
Toggle - For those of you fortunate enough to own a Gillette toggle, this is your stand.
All the models are labeled on the bottom so you can tell which are which.
**UPDATE** Models have been updated with drainage holes as requested.