"Jar" for Simple Mason Jar Candy Machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a vase mode jar for the candy machine...
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 340
- Wydruki
- 6
- Wyświetlenia
- 2737
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Nothing against Mason jars… we just didn't have one on hand. Decided to just create a printable one using FreeCAD and see how it turned out in clear PETG.
I printed in vase mode with 0.4mm nozzle, 0.8mm line width, 0.3mm layer height going very slow (~15-20mm/s) with no cooling. Used a single “concentric” bottom layer. It didn't come out super clear, but I suspect that's in part because I only dried the old roll of filament for a couple hours.
It just slides in place. There's nothing to lock it down (friction fit or threads). As drawn, it holds a 12 oz. carton of “Dubble Bubble,” though I don't see any reason you couldn't scale the z-height if you want more or less.
Thanks to Carl Belcher for a great model!