Recreator3D bottle cutter using 18mm snap blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New top part for the Community Bottle Cutter - uses a cheap 18mm snap blade.
- Ocena
- 4,333 / 5
- Polubienia
- 36
- Pobrania
- 343
- Wydruki
- 4
- Wyświetlenia
- 1320
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I really struggled to get the original design with bearings working reliably, so I did this remix using 18mm snap blades, which I have hundreds of. The blade will cut about 10 bottles before you need to snap that section and go to the next. It's also adjusted to take a couple of British penny coins as the anti-wear plate (should still take a US 1-cent coin with a dot of superglue to hold it in).
It requires 2x 6mm (M4 thread) brass inserts for the blade clamp, which can be heated with a soldering iron or cigarette lighter before being inserted.