Tinyhawk 2 Freestyle Battery Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from a design by Takumi13. This is a battery case for the EMAX Tinyhawk 2 Freestyle.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Top-mount battery case for the EMAX Tinyhawk 2 Freestyle, remixed from Takumi13's design. I included two cutouts to make room for the stock camera mount, and made some alterations with a different printing orientation in mind. Also widened the holes for the m2 mounting screws.
Printed in PLA on 0.4mm nozzle at 0.15mm layer height with no supports.
EDIT: tested with the original EMAX 450mAh batteries (2x 1S), as well as larger GNB 2S 550mAh batteries. The 2S batteries were a snug fit but still works well.