1 / 2
Dust cover / lens protector for Sega toys homestar projector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust cover / lens protector for Sega toys homestar original and flux projector
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a dust cover for the Sega Homestar original and flux star projectors, so the lens does not get covered in dirt while its not in use. Print it with the flat side down. Supports needed, but it would probably print fine if your printer has good tuning for bridging. I printed it from PETG but you can use any filament - of course not abrasive filaments like glow in the dark or carbon filaments.