Spool Roller / Holder for Bambu Lab P1P / P1S / X1 / X1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mashup of different Spool-Roller Designs to accept a wider range of spools
- Ocena
- 4,926 / 5
- Polubienia
- 330
- Pobrania
- 2145
- Wydruki
- 32
- Wyświetlenia
- 11 647
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've used the Spool Roller by thrutheframe for quite a while until in noticed, that some of the spools on the market won't fit - most popular the Prusament spools, which you need to force on the roller until the front tab breaks off - some others wont fit at all
so i took idea to use to original metal holder and created a spool roller that fits inside this space
Single Body + 2 interchangeable Rollers
they can be swapped quickly without disassembling holde
Type A: is self centering and can be used for wider spools
Type B: has notches to keep narrower spools centered
if you are not sure which one is right for you: the Type A is perfectly fine - only almost empty cardboard spools with little weight tend to slide around - here the Type B is more sturdy
BOM
- 2 x regular 608 ball bearings 8x22x7 mm
- 1 x the stock spool holder from the P1P/X1/X1C
compatibility
- basically every spool holder that utilizes the stock spool holder
- also fits the the Side Spool Arm for the P1P
printing
the body can either be printed upright with traditional supports or at a 45° angle with the back side (indicated by an arrow) on the buildplate with additionally painted supports - it does not really matter, they are sturdy enough - just don't use silk filaments)
the rollers should be printed upright with concentric top and bottom patterns and a traditional support at the base - pick a random seam position, so it looks a bit nicer - you only need to print one roller - if you are not sure, just print Type A
assembly
flip the original spool holder upside down and just gently press the spool roller body into the metal frame - the arrow on the underside indicates the side with the screws facing the printers body
apply the bearings to the roller (they are supposed to have a snug fit and not fall off - you can blast the ends with a torch and press them on warm, so the fit snuggly)
then just insert the roller into the body: done
special thank you
to MOOO for the Original Bambu Lab P1P Filamentholder model, which saved me some time here :)