1 / 8
Filamenthalter für Spulle / Filament holder for spool — zdjęcie 1
1 / 8

Filamenthalter für Spulle / Filament holder for spool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Einfaches einklemmen und lösen ohne Filamentdraht zu verbiegen / Easy to clamp and release without bending filament wire

Ocena
5 / 5
Polubienia
14
Pobrania
384
Wydruki
4
Wyświetlenia
784
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Einfaches einklemmen und lösen ohne Filamentdraht zu verbiegen. Das geht sehr schnell und problemlos. Filament bleibt gerade und muss nicht jedes mal abgeschnitten werden. Spart Zeit und Nerven. Filament einfach reinkommen bis es einrastet. 

20.04.2023
Eine verbesserte Version bereitgestellt.

------ ENGLISH ------

Easy to clamp and release without bending filament wire. This is very fast and without problems. Filament remains straight and does not have to be cut off every time. Saves time and nerves. Filament simply come in until it clicks into place. 

20.04.2023
An improved version provided..
 

Print Settings:

Printer: Bambu Lab X1C
Print time: 0 h 25 min.
Filament: PLA
Filament Brend: Geeetech Green, Silver, Black (Silk)
Resolution: 0.12 mm
Infill: 15%
Brim: No
Rafts: No 
Supports: No

Tagi