Flick Flier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small frisbee like object that you flick off of your finger to spin and propel.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 952
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Small propeller/frisbee that can be fun to play with. Powered by the flick of your finger. May need to scale based on hand size. You want the center hole to be close but not a tight fit to the tip of your finger. The model is sized to me and my hands are typically between small and medium sized gloves. The finger hole in the model is 16.5 mm (0.65 inches). If scaling the whole model isn't working out well for people I can make different size finger holes.
I've uploaded a few different variations based on the number of blades. The main difference is weight. With less blades it's less likely to cause damage to itself or other things. More blades may be better for dealing with some light wind outside.
Printed in PLA with .1 mm layer height, but not sure that is necessary. No supports, just quickly ran a knife around the finger ring to trim off the little sags at the top of the ring. You would want to mirror the model for left hand flicking.