1 / 7
AnkeMake M5 Blink-Mini Camera Mount v6 — zdjęcie 1
1 / 7

AnkeMake M5 Blink-Mini Camera Mount v6

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An Amazon Blink-Mini camera mount for the AnkerMake M5 3D-Printer.

Ocena
5 / 5
Polubienia
21
Pobrania
178
Wydruki
1
Wyświetlenia
1008
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a modification of Alex B (https://www.printables.com/de/social/524533-alex-b) camera mount. It will hold an Amazon Blink-Mini camera.

This is my first project. I used Thinkercad.

What is different to the original model:

  • The holder ist now for the round plate of the Blink-Mini camera
  • It ist 4 mm higher so the camera cabel will fit in the special gab.
  • A special gab for the camera cabel

How do I printed it:

  • On an AnkerMake M5 (foundet it on Kickstarter)
  • Used the origial AnkerMake PLA+ filament (here in gray)
  • Used the AnkerSlicer with 20% infill, 100% flow/215 °C/60 °C plate temperature
    (initial layer: 120% flow/230 °C/65 °C plate)
  • Layer height: 0,2 mm
  • Speed: Best experience with 50 mm/s for the initial layer an skirt/Print speed at 250 mm/s
  • No supports needed (printed upside down)
  • ~ 2h print time
  • 49g filament
  • 86 x 211 x 65 mm

 

I hope you can use it. I use the Blink-Mini camera for watching what the print does.

 

Tagi