Printable Slot nut for I-Type 40x40 Aluminium Profile by KMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the construction of my enclosure, I designed 3d printable sliding blocks. Why are these special, you ask?
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
For the construction of my enclosure, I designed 3d printable sliding blocks. Why are these special, you ask? Quite simply, you can also insert the slot nuts afterwards. Because of the flexible pin the sliding block stays in place.
The sliding blocks are printed with a core hole for M6 thread. After printing, I then cut an M6 thread in the slot nut. For more precise positioning, I also designed a template (see templateSlotnut.3mf) for the bench vise. These are fixed to the bench vice via a magnet (D=8mm, h=3mm,glued in space).
This makes the job easier :D
The Printable Slot nut for I-Type 40x40 Aluminium Profile is part of the Enclosure Collection from KMS:
https://www.prusaprinters.org/social/58577-kerle-makerspace/collections/30583
Happy printing and stay tuned :D
Yours KERLE MAKERSPACE
PS: Feel free to like or write a comment ;D keeps me motivated on sharing ideas ;D
Print instructions
I have provided you with a G-code for 4 sliding blocks. I have also provided you with a 3MF file so that you can see the correct orientation in relation to the printbed. The angle has proven to be advantageous through several tests, so that the pin has the necessary stability.
Recommendation:Use 4 Contourlines for better Threadcutting
ORIENTATION SlotNut: Tilt at 10° Pin Facing upwards
LAYERHEIGHT: .2mm
PRINTING TEMPERATURES:
Nozzle
Bed
</table>
Filament: Prusament PETG (Jet Black and Organe)
Support: Use Support on Bed only! for SlotNuts