Original Prusa Enclosure customisable taller feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An OpenSCAD script to increase the height of the feet of the Original Prusa Enclosure by a user-specified amount.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 770
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
My Original Prusa Enclosure sits on a worktop, with the rear feet sitting on a window sill that is approximately 25mm above the worktop. I needed some taller front feet to keep the enclosure level. This OpenSCAD script extends the original feet by a user-specified amount.
It imports the STL file of the original feet, as provided by Prusa here, and scales up a slice from the middle of the STL mesh, so as to preserve the model detail at the top and bottom of the original model.
To ensure I printed the extended feet with the same settings as the original, I imported the settings from the supplied GCODE, and I printed the feet with Prusament PETG Prusa Orange to match the originals.
The STL provided here is 25mm taller than the original, but you can use the script to increase the feet by any required amount.
CJH, 31 March 2023.
(updated 01Apr23 to smooth the transition between the stretched middle slice and the top slice)