Snap Buckles for outdoors gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes the right size buckles cannot be found when needed. Especially true when one side is broken and sewn in.
- Ocena
- 0 / 5
- Polubienia
- 74
- Pobrania
- 477
- Wydruki
- 0
- Wyświetlenia
- 1584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made it to have a parametric 3D model for varying outdoor products. It snaps together, and releases nicely by pressing on the sides. This can be resized while maybe print in place will at some stage become questionable. Use ASA filament and 0.2 mm layer height. Total printing time is 91 minutes on Prusa Mini+. Filament settings for Prusament ASA, non modified. Nozzle 0.2 mm.
The filenames reveal that they were originally made to replace one or both male and female buckles of the hatch cover straps of a North Star tandem kayak.