Dual 5" and 6" sandpaper holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal Gridfinity sandpaper holders that accepts 6" or 5" (with insert) sandpaper.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
4/29/23 - Added Fusion 360 file for your editing pleasure
---------------------------------------------------------------------
A Gridfinity sanding disk storage solution that accepts 5" or 6" discs. Base generated with Fusion Gridfinity Generator by Le0Michine. I couldn't find a lay flat Gridfinity solution for discs for a true 5" I was happy with. I also know I'm likely to upgrade to a 6" sander and wanted some flexiblity.
- Approx. 39mm high (w/d Gridfinity base) / stackable
- Accepts 6" (155mm) with base print
- Accepts 5" (130mm) by way of insert and can be swapped as needed
- ~1.5mm of clearance for pesky hook and loop disks that won't stack just right
- Fits ~20 discs hook and loop
- Included grit labels: most common ( 80, 120, 150, 180 ) higher grit (220+, 320+)
- Finger slot for both base and insert for easy disc removal
- Chamfered edges except on lower inside ring edge to prevent discs sliding under
- .3MF Files included
First upload so let me know if adjustments are needed.
For printing, PLA is fine. Used 15% infill and have printed at both .2 and .16 with no issues using a .4 nozzle.