1 / 3
Inland Spoolless Filament to Bambulab Adapter Spacer — zdjęcie 1
1 / 3

Inland Spoolless Filament to Bambulab Adapter Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

an adapter ring to use Inland spoolless filament refills on Bambulab Spools

Ocena
5 / 5
Polubienia
22
Pobrania
224
Wydruki
1
Wyświetlenia
1106
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

a reasonably efficient adapter for using Microcenter's Inland branded filament refills on a Bambulab spool. as Inland refills are slightly narrower than the Banbulab ones, the filament does have a tendency to become a bit messy but still works.

Specifically, this adapts between a filament core inside diameter of 90mm to a spool minor outer diameter of 81.5mm.  Overall thickness is 0.8mm, optimized for printing with a 0.4mm nozzle and 0.2mm layer height. 

In addition to the .3mf file, a .step file is also attached for anyone seeking to start from a model more precise than the typical facet body.

Tagi