3D Printed Case for the Starlink Dishy DC Power Supply and PoE Injector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Starlink Dishy DC Power Supply PoE Injector enclosure posted by Everlanders at https://www.thing
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 344
- Wydruki
- 0
- Wyświetlenia
- 3667
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a remix of the Starlink Dishy DC Power Supply PoE Injector enclosure posted by Everlanders at https://www.thingiverse.com/thing:5893999
The video showing Everlanders design and printing can be seen here: https://youtu.be/RlENmAikSQQ
The DC Power Supply PoE Injector can be found here, https://boondocker.io/products/dishy-rv-power-supply
For the remix, I made the enclosure a simple square design, beefed up the corner posts, and added labels for all four ports. This remix does not include the port for the 48v Aux Output port. The 48v Aux port will have to be removed from the board as Everlanders did.
You can use 3.5mm brass nut inserts for the back plate, but this is optional as the back fits snuggly into recessed channels.
Print:
.2mm, 100% Infill, no supports
I printed in ABS, so I've included a version with dog ears to help hold down the corners.
ADDED: 2023/04/03 Decided to have the power switch on the box so I removed the “Remote Shutoff” cutout and made a cutout for a Rocker Switch like this to turn the dish off (not using POE for the router); https://www.amazon.ca/COOLOOdirect-Solder-Rocker-Switch-Toggle/dp/B071Y7SMVQ/ref=sr_1_6?crid=1D6983QRDCFVE&keywords=Rocker+Switch&qid=1680400070&s=industrial&sprefix=rocker+switch%2Cindustrial%2C237&sr=1-6
EDIT: 2023/06/14 Based on @ZacMorris observations, and me finally getting my Dishy, I have modified the “Dishy 12v Box Switched v3” to “Dishy 12v Box Switched v4” so that the back fits properly.