DnD Travel Dice Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Travel dice holder that holds full sets of DnD dice (i.e. d4, d6, d8, 2d10, d12, d20)
- Ocena
- 4,875 / 5
- Polubienia
- 392
- Pobrania
- 1192
- Wydruki
- 9
- Wyświetlenia
- 7176
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- BSD License
Variant of my Travel Dice holder for holding an entire set – or up to 5 sets – of DnD dice. The lid screws on, and you can string the entire thing, which even prevents you from losing the lid.
See here for the original: https://www.printables.com/model/435582-travel-dice-holder
The lid uses the Knurled Surface Library here: https://www.thingiverse.com/thing:32122
and both parts use the threading library here: https://github.com/adrianschlatter/threadlib
The threaded parts (and knurls) should be printed at a smaller width (I used 0.12mm and 0.15mm), but everything below the threads doesn't really matter (I used variable width to print that at 0.3mm)
IMPORTANT: The threads on the lid should be thick to prevent damage when screwing/unscrewing. I used 5 walls when printing the lid.