Pannier Rack (Wall Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I like this idea, but planned to mount directly into wall or home built rack. I also wanted to use all 3' for 5/8"…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I like this idea, but planned to mount directly into wall or home built rack.
I also wanted to use all 3' for 5/8" steel rod I got from the hardware store...
So I changed it to be just a screw hole, and modified to make a mid-rod support mount. It worked so well I built two more! One for work and one for the garage, haha. My Ortlieb and Lone Peak pannier can hang with the mid-support mount in between the hooks.
Build steps:
Print at ~35% infill, on side for more strength
-Two end pieces
-One mid piece
Purchase/source
-5/8" rod (non-threaded)
-6 screws (I used self tapping, cabinet screws, ~ 1 3/4" long)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
35
Filament: Matter Hackers PLA
Category: Organization